2019 Kenworth K200 6 x 4 Prime Mover Truck
2019 Kenworth K200 6 x 4 Prime Mover Truck
Details
- VIN : 6F5000000KA466542
- Odometer (Kms Showing) : 176020
- Axle Configuration : 6 x 4
- Cab Type : Cab Over Sleeper
- Engine Type : 6 cylinder Cummins Turbo (X15, 100th Year Anniversary)
- Fuel Type : Diesel
- Transmission Type : Eaton Fuller 18 speed manual
- Suspension Type : Airbag
- GVM (kg) : 26500
- B-Double Rated : Yes
- Colour (Exterior) : White
- Colour (Interior) : Black
- Tyre Size (Front) : 385/65R22.5
- Tyre Size (Rear) : 11R22.5
- Rims : 10 Stud
- Compliance : 2019/10
- Features: ABS, Aero Kit, Air Conditioning, Bull Bar, Central Locking, Cruise Control, Diff Locks, Power Steering, Power Windows
Extras:
- 2.8 meter big cab
- 110Tonne rated on application
- 600HP Cummins X15
- 2050 foot pound 18 speed road ranger box
- Twin single bunks
- Twin air ride seats (driver and Passenger)
- Twin overhead no din, UHF radios, all controls on the hand piece.
- 80L upright fridge
- 30L microwave
- 3000watt seine wave inverter behind the passenger seat
- Top of the range Coolabah remote bunk heater and air conditioner powered by lithium ion battery with truck jump start capacity (behind the driver’s seat)
- Super single steer
- 7.2 tonne front axel
- Bridgestone’s all round
- Top of the range AIR CTI, adjust on the fly, on drives (increased kms on drive tyres by about 25%)
- Full custom deck plate
- Custom Chris barren Bull Bar
- LED headlights
- LED X RAY spot lights
- Custom Full lights up rear facing bunk wings
- Custom mirror LED clearance lights
- Custom 2 rows of bunk roof LED clearance lights
- Turbo Timer
- ISRI Drivers Seat
- UHF Radio
2017 Kenworth T409SAR 6 x 4 Prime Mover Truck
2017 Kenworth T409SAR 6 x 4 Prime Mover Truck
Details
- VIN : 6F5000000HA461060
- Odometer (Kms Showing) : 318581
- Axle Configuration : 6 x 4
- Cab Type : Bonnetted Sleeper
- Engine Type : X15 Cummins 550HP 6 cylinder turbo
- Fuel Type : Diesel
- Transmission Type : Eaton Fuller 18 speed manual
- Suspension Type : Airbag
- GVM (kg) : 26500
- GCM (kg) : 97000
- B-Double Rated : Yes
- Colour (Exterior) : White
- Colour (Interior) : Black
- Tyre Size (Front) : 385/65R22.5
- Tyre Size (Rear) : 295/80R22.5
- Rims : 10 Stud
- Compliance : 2017/12
- Features: ABS, Aero Kit, Air Conditioning, Central Locking, Cruise Control, Diff Locks, Power Steering, Power Windows, UHF Radio
Extras:
- 50 inch bunk
- 97 tonne rated B double/ road train
- CANT BUY THIS SPEC EVER AGAIN NEW
- Custom bunk roof lights 2 rows
- Drivers air seat
- Super single steers
- 7.2 front axel
- 18 speed road ranger
- Custom Tank clearance lights
- Custom rear bunk wing lights
- Custom low twin air cleaners
- Custom full polished deck plate
- NEW jost ball race turntable
- Custom round painted steel tanks
- Custom colour matched fire extinguisher box driver’s side
Other Comments
- Engine Turns Over : Yes
- Key : Yes
- Spare Key : No
- Owner`s Manual : No
- Service History : Partial
<strong
2017 Kenworth T409SAR Prime Mover Truck
2017 Kenworth T409SAR Prime Mover Truck
- Compliance Date: 11/2017
- Cab Type: Bonneted Sleeper
- VIN: 6F5000000HA461061
- Engine Type: Cummins X15 6 cyl turbo diesel
- Transmission: Eaton Fuller 18 speed manual
- Suspension Type: Airbag
- Exterior Colour: White
- GVM: 26500kg
- Odometer: 452767kms
- Running Condition: Yes
- Key: Yes
Extras:
- 50 inch bunk
- 97 tonne rated B double/ road train
- CANT BUY THIS SPEC EVER AGAIN NEW
- Custom bunk roof lights 2 rows
- Drivers air seat
- Super single steers
- 7.2 front axel
- 18 speed road ranger
- Custom Tank clearance lights
- Custom rear bunk wing lights
- Custom low twin air cleaners and clearance lights
- Custom mirror LED clearance lights
- Custom front quarter guards
- Custom rear mud flap bar
- Custom deck plate
- Custom round painted steel tanks
- Custom cross over fuel pickups so you can just fuel one tank
- Custom tuned FM radio long range aerial
- Custom colour matched fire extinguisher box driver’s side
2013 Mack CLXT 6 x 4 Prime Mover Truck
2013 Mack CLXT 6 x 4 Prime Mover Truck
- Cab Type: Bonneted Sleeper
- VIN: 6FMT14H69DD804207
- Rego No: SB94MC (Sold unregistered, without plates)
- Engine Type: 6 cyl turbo diesel MP10 600c
- Compliance Date: 03/2013
- Suspension Type: Airbag
- Colour: White
- GVM: 26000kg
- GCM: 90000kg
- Odometer: 1141026
- Running Condition: Yes
- Key: Yes
- Other Notes: Air Conditioning, power steering, UHF radio, poly gaurds, Jost 5th wheel, bull bar, twin upswept exhausts, LED spotlights, checkerplate rear deck, LED tail lights
- Location: Tumut NSW
Disclaimer: All items are Sold on an `As is Where is` basis. Description and photos are for use as a guide only, inspection is highly recommended prior to bidding.
For all inspection requests and enquiries please contact Kim McCue - 0428 644 681 (SN:6F2GF67004DL00343) (872362-4)
2002 Kenworth T950 Tradition Primemover
2002 Kenworth T950 Tradition Primemover
- Cab Type: Bonnetted Day Cab / Cab Chassis Truck
- VIN: 6F50000002A423618
- Rego: RWJ316
- Engine Type: Caterpillar
- Engine HP: 550 Caterpillar
- Fuel Type: Diesel
- Transmission: 18 Speed Manual
- Suspension: Airbag
- B-Double Rated: Yes
- GVM: 26000Kg
- Odometer: 769012
- Colour(Interior): Blue
- Colour Exterior: Blue/White
- Features/Extras: ABS, Power Steering, UHF Radio, Tyre flotation, Aftermarket ebs for trailers.
- Running Condition: Yes
2013 Iveco Powerstar 7200 Primemover
2013 Iveco Powerstar Primemover
- Cab Type: Bonnetted Sleeper
- VIN: 6F2SFAN00DDW30063
- Rego: SB65GM
- Engine Type: Cummins
- Engine HP: 525
- Fuel Type: Diesel
- Transmission: 18 Speed Manual
- Suspension: Airbag
- B-Double Rated: Yes
- GVM: 90000
- Odometer: 715793
- Colour(Interior): Black/Grey
- Colour Exterior: White
- Features/Extras: ABS, Crusie Control, Central Locking, Power Steering, UHF Radio, Diff Locks, Power Windows, Air Conditioning, Bull Bar.
- Running Condition: Yes
- Location: Mount Gambier, SA
Disclaimer: All items are Sold on an `As is Where is` basis. Description and photos are for use as a guide only, inspection is highly recommended prior to bidding.
For all inspection requests and enquiries please contact Kim McCue - 0428 644 681 (872362-6)
2013 Iveco Powerstar 7200 Primemover
2013 Iveco Powerstar Primemover
- Cab Type: Bonnetted Sleeper
- VIN: GF2SFAN00DDW30186
- Rego: SB25HH
- Engine Type: Cummins
- Engine HP: 525
- Fuel Type: Diesel
- Transmission: 18 Speed Manual
- Suspension: Airbag
- B-Double Rated: Yes
- GCM: 90000
- Odometer: 642337
- Colour(Interior): White
- Colour Exterior: Grey/Black
- Features/Extras: ABS, Central Locking, Cruise Control, Power Steering, UHF Radio, Diff Locks, Power Windows, Air Conditioning, Bull Bar, Spot Lights Drop Sunvision.
- Running Condition: Yes
2012 Iveco PowerStar 7200 Prime Mover
2012 Iveco PowerStar Prime Mover
- Cab Type: Bonneted Sleeper Cab
- VIN: 6FRSFAN00GDV30286
- Rego:SB63FX
- Engine Type: Cummins
- Transmission: Automatic
- Suspension: Airbag
- B-Double Rated: Yes
- GVM:24500
- GCM:90000
- Odometer:735692
- Colour(Interior):Black/Grey
- Colour Exterior: White
- Tyre Size(Front):11R22.5
- Rims: Spider
- Features/Extras: ABS, Central Locking, Cruise Control, Power Steering, UHF Radio, Diff Locks, Power Windows, Air Conditioning, Bull Bar, Aintyne Deflation, Air Gauges.
- Running Condition: Yes
- Key:Yes
- Service History: Yes
2012 Iveco Powerstar 7200 Primemover
2012 Iveco Powerstar Primemover
- Cab Type: Cab Over Day
- VIN: 6F2SFAW00CDV30106
- Rego: SB88FT
- Engine Type: Cummins ISX
- Engine HP: 485
- Fuel Type: Diesel
- Transmission: Automatic
- Suspension: Airbag
- B-Double Rated: Yes
- GCM: 90000kg
- Odometer: 731763
- Colour(Interior): Grey
- Colour Exterior: White
- Rims: 10 Stud
- Features/Extras: ABS, Cruise Control, Power Steering, UHF Radio, Air Bags, Diff Locks, Power Windows, Air Conditioning, Bull Bar, Drop Sunvisor, Air Gauges.
- Running Condition: Yes
2004 Iveco Powerstar 6700 Primemover
2004 Iveco Powerstar 6700 PrimemoverCab Type: Bonnetted SleeperVIN: 6F2GF67004DL00343Rego: SB91HPEngine Type: CATERPILLAREngine HP: 550Fuel Type: DieselTransmission: 18 Speed ManualSuspension Type: AirbagB-Double Rated: YesGCM: 75000Odometer: 179588Tyr
John Deere 670D Grader
John Deere 670D Grader
- Brand/Make: John Deere
- Model: 670D
- PIN: DW670DX608748
- Indicated Hours: 11625
- Amber beacon light, multi shank rear ripper, front and rear lights, 6 cyl turbo diesel, Reverse camera, enclosed A/C Cab
- UHF Radio, CD player, slope meter, hand and foot controls, Approx blade length: 3500mm
Caterpillar 324DL Hydraulic Excavator
Caterpillar 324DL Hydraulic Excavator
- Brand/Make: Caterpillar
- Model: 324DL
- PIN: CAT0324DCGPK00311
- Indicated Hours: 14223
- Rego No: S64SYW (Sold unregistered, without Plates)
- Other Notes: Enclosed A/C cab, reverse camera, approx track width: 600mm, 6 cyl turbo diesel, twin amber beacon lights, 6 tooth GP bucket, Hydrostatic forward and reverse, joystick and foot controls, quick hitch
- Damage: Window is damaged
2019 Stone Star Quadaxle STA Widening Low Loader Trailer
2019 Stone Star Quadaxle STA Widening Low Loader Trailer
- Type: Widening Low Loader, Steering Quadaxle with remote & ramps
- Year: 04/2019
- Make: Stone Star
- Model: Quad Axle STA
- Widening From: To: 3.5m
- Axle Configuration: Quadaxle
- VIN 1: L1C39HRP3H0000901
- Previous Registration: YS98AY
- Registration Expiry: Sold without registration, no number plates
- ATM: 5000kg
- Suspension: Airbag
- Extra Accessories: Tool Boxes
2016 Isuzu DMax 4WD Dual Cab Ute
2016 Isuzu DMax 4WD Dual Cab Ute
- Make: Isuzu
- Model: Dmax
- Variant: Dual Cab Ute
- Drive Type: 4WD
- No. of Seat: 5
- Body Type: Service Body
- Build Date: 06/2016
- Transmission: Manual 5 speed
- Fuel Type: Diesel
- Registration Status: Sold Unregistered, Without Plates
- Odometer: 149059
- VIN: MPATFS85JG000151
- Engine No: PF6906
- Key: Yes
- Spare Key: Yes
- Owners Manual: Yes
- Service History: Yes
- Engine Turnover: Yes
- Seat & Upholstery: Fair
- Controls and Dash: Good
- Paint: Fair
- Features: Air conditioning, Bull bar, CD player, Cruise control, Drivers airbag, Power steering, Electric windows, Satellite navigation, Side steps, Snorkel, Spot lights, UHF
- Other Notes: Damage right guard, Right hand doors, bull bar with rails, flashing lights.
2002 Toyota Landcruiser 4WD Service Body Ute
2004 Toyota Landcruiser 4WD Service Body Ute
- Make: Toyota
- Model: Landcruiser
- Variant: Service Body Ute
- Drive Type: 4WD
- Body Type: Service Body
- Build Date: 03/2004
- Compliance Date: 04/2004
- Indicated Kms: 612030
- Engine Capacity: 4.2 ltr V8 Turbo
- Transmission: Manual 5 speed
- Fuel Type: Diesel
- VIN: JTELC71J600006837
- Key: Yes
- Owners Manual: No
- Service History: No
- Engine Turnover: Yes
- Controls and Dash: Fair
- Paint: Fair
- Features: Alloy wheels, Bull bar, Driving lights, Side steps, Snorkel, Spot lights, Tow bar, UHF Radio, winch
- Other Notes: Side steps, Awning, rear mount poly tank coupled with petrol powered motor, pump and hose reel, dual amber beacon lights, roof mount LED light bar
2018 Maxitrans Tri- Log A & B Combo Trailer
2018 Maxitrans Tri- Log A & B Combo Trailer
- Year: 01/2018
- Make: Maxitrans
- Axle Config: Triaxle
- B-Double Rated: Yes
- VIN 1: 6F80000000B093697
- VIN 2: 6F80000000B093698
- Rego No: SY49HA Sold unregistered, without Plates
- Rego No: SY48HA Sold Unregistered, without Plates
2018 Maxitrans Tri- Log A & B Combo Trailer
2018 Maxitrans Tri- Log A & B Combo Trailer
- Year: 01/2018
- Make: Maxitrans
- Axle Config: Triaxle
- B-Double Rated: Yes
- VIN 1: 6F80000000B093095
- VIN 2: 6F80000000B093096
- Rego No: Sold unregistered, without Plates
2012 Maxitrans ST-3 Roadtrain Log Trailer A & B Combo
2012 Maxitrans ST-3 Roadtrain Log Trailer A & B Combo
- Make: Maxitrans
- Year: 07/2012
- Axle Config: Triaxle
- B-Double Rated: Yes
- VIN 1: 6F80000000B083741
- VIN 2: 6F80000000B083740
2003 Plunkett Tri Log Lead Trailer
2003 Plunkett Tri-Log A & B Combo Trailer
- Year: 08/2003
- Make: Plunkett
- Axle Config: Tri axle
- VIN 1: 6T9T2500S321NY008
- VIN 2: 6T9T2500S321NY007
- Rego No: SYO4BO Sold Unregistered, without plates
- Rego No: SYO5B0 Sold Unregistered, without plates
2011 Maxitrans Log Trailer A-B Combination
2011 Maxitrans Log Trailer A-B Combination
- Year: 01/2011
- Make: Maxitrans
- Axle Config: Triaxle
- Rego No: SY04EF Sold Unregistered, without plates
- Rego No: SY05EF Sold unregistered, without Plates
- VIN 1: 6F8T250000B079580
- VIN 2: 6F8T250000B079579
2000 Maxitrans Log Trailer A-B Combination
2000 Maxitrans Log Trailer A-B Combination
- Year: 2000
- Make: Maxitrans
- Axle Config: Triaxle
- VIN 1: 58985
- VIN 2: 6F8T2500YB060550
- Rego No: SY28EL Sold unregistered, without Plates
- Rego No: SY28ET sold unregistered, without plates
1990 Log Trailer A-B Combination Southern
1990 Log Trailer A-B Combination Southern Cross ST3
- DOM: 05/1990
- Model: Southern Cross ST3
- Axle Config: Triaxle
- VIN 1: 6B9V25ASXLAAB2709
- VIN 2: S001124P
- Rego No: Sold unregistered, without Plates
2009/2001 Maxitrans/Ryam Log Trailer A-B Combination
2009/2001 Maxitrans/Ryam Log Trailer A-B Combination
- Make: Maxitrans
- Year:11/2009
- VIN 1: 6F8T250000B079208
- Axle Config: Triaxle
- Rego No: SY27EL Sold unregistered, without Plates
- Make: Ryam
- Year: 12/2001
- VIN 2: 6T9T27R11100Z7001
- Rego No: SY37EL Sold Unregistered, without plates
2007/2002 Elphinstone Log Trailer A-B Combination
2007/2002 Elphinstone Log Trailer A-B Combination
- Make: Elpinstone
- Year: 02/2007
- VIN 1: 6L9T2500372EL0209
- Rego No: TBW584 Sold Unregistered, without plates
- Make: Elphinstone
- Year: 07/2002
- VIN 2: 6L9T2500322EL0080
- Rego No: YEI892 Sold Unregistered, without plates
1992 Southern Cross ST3 Log Trailer A & B Combination
1992 Southern Cross ST3 Log Trailer A & B Combination
- Make: Southern Cross ST3
- Year: 1992
- Axle Config: Tri axle
- VIN 1: 6B9V13ASXNAAB2841
- VIN 2: PT10051787
- Rego No: TDJ572 Sold Unregistered, without plates
- Rego No: TKU354 Sold Unregistered, without plates
Caterpillar 289D Skid Steer Loader
Caterpillar 289D Skid Steer Loader
- Asset Type: Skid Steer Loader
- Brand/Make: Caterpillar
- Model: 289D High Flow XPS Two Speed
- PIN: CAT0289DLTAW04751
- Features: Rubber tracks
- Indicated Hours: 1693
- Other Notes: Enclosed A/C cab, joystick controls
Caterpillar 324DL Hydraulic Excavator
Caterpillar 336D Hydraulic Excavator
- Brand/Make: Caterpillar
- Model: 336D
- Serial No: CAT0336DKKKT00132
- Indicated Hours: 8903
- Engine: 6 cyl turbo diesel
- Other Notes: Hydrostatic forward and reverse, safety railing, enclosed A/C cab, joystick and foot controls, UHF radio, with log grabbing attachment
Excavator Samsung SE210LS-3 with Log Grab
Excavator Samsung SE210LS-3 with Log Grab
- Make: Samsung
- Model: SE210LS-3
- Serial No: FCY1490
- Engine No: 29245920
- Machine Weight (kg): 20,500
Excavator Komatsu PC200-6 with Log Grab
Excavator Komatsu PC200-6 with Log Grab
- Make: Komatsu
- Model: PC200-6
- Serial No: 8466
Komatsu PC200-6 Hydraulic Excavator
Komatsu PC200-6 Hydraulic Excavator
- Model: PC200-6
- Serial: 86921
- Joystick & foot controls, track width: 600mm
- Note: Non goer, no key, tilt tray recommended for removal, hours unknown
1984 RFW CA1A 4WD Water/Fire Truck
1984 RFW CA1A 4WD Water/Fire Truck
- Make: RFW
- Model: CA1A
- Drive Type: 4WD
- Engine No: 6D0210945
- Previous Registration: SB36AG (Sold Unregistered Without Plates)
- Engine: 6 cyl Diesel
- Transmission: Automatic
- Indicated kms: 52250
- Seating Capacity: 5
- GVM: 20000kg
- GCM: 49000kg
- Rim Type: Spider
- Other Comments: Multiple storage compartments, Bull Bar, rear mount pump with control board and hose reels, hi-low speed, UHF Radio
Liquid Tanker Dual Axle with Petrol Driven Pump
Liquid Tanker Dual Axle with Petrol Driven Pump
- Features: Rear access top fill
- Approx tanker dimensions: 11000 x 1400 x 1400mm
- Yard legs, Honda GX160 pull start petrol motor with pump, rear access ladder, LED tail lights
2017 Grader Blade Attachment for Bobcat GR220-270D
2017 Grader Blade Attachment for Bobcat GR220-270D
- Year: 2017
- Brand/Make: Metal Meccanica Modern SRL
- Model: GR220-270D
- Serial No: 10051
- Weight Approx: 880 kg
- Guide Wheels, approx blade width: 2500mm
2017 Caterpillar A4175MP20112 Multipurpose Bucket
2017 Caterpillar A4175MP20112 Multipurpose Bucket
- Year: 2017
- Brand/Make: Caterpillar
- Model: A4175MP20112
- Weight Approx: 471 kg
Mechanical Grab 5 Finger ZX250
Mechanical Grab 5 Finger ZX250
- Model: ZX250
- Build Date: Mar-20
- Serial No: FHF-GRAB-705
- Net Mass (kg): 1170
Ripper Attachment
Excavator Ripper Attachment
- To suit machine: Unknown.
Skid Steer Attachment
Skid Steer Attachment
- To suit machine: Unknown.
Fuel Cell Trailer
Fuel Cell Trailer
- Axle Config: Single
- Colour: Grey
Fuel Cell Trailer
Fuel Cell Trailer
- Axle Config: Single
- Colour: Blue
COVID-19 INFORMATION
- Grays will require social distancing standards to be followed by employees and members of the public.
- Grays staff are not permitted to handle customers devices or stationery.
- Grays staff may ask you to wait outside a premises to ensure people numbers do not exceed social distancing requirements.
- Please maintain a distance of 2 metres between yourself and other people when on site.
- Grays will not be supplying customers with Hi-Viz vests.
- Grays staff may ask you to leave site should you display any flu like symptoms.
WHS
Grays advises all buyers that all plant offered for sale at auction may not be fit for use in a workplace. Grays will provide:
- Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports)
- Clear identification and marking to identify that the plant item is only suitable for scrap or spare parts
- Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings.
Please note:
- Enclosed footwear must be worn at all times when inspecting or collecting goods.
- Persons under the age of 16 years will not be permitted onsite.
- Tradespeople eg; electricians, plumbers etc will be required to produce the relevant licence before commencing work on site.
- Riggers, Forklift and Crane Drivers etc will be required to produce the relevant license before commencing work on site.
- It is a condition of entry to site that all visitors comply with any directions given by Grays staff or their representatives.
- Work carried out on this site must be completed in a manner compliant with all Occupational Health & Safety legislation.
- All power tools and equipment used on site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment.
- Grays or their representatives will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site. (eg; safety footwear, safety eyewear, hard hats etc).
- The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres.
- Note: It is the buyer’s responsibility to ensure their vehicle complies with all legal requirements for towing any towable asset, non-compliant vehicles will not be permitted to leave with an asset on tow.
Safe Work Method Statement
Note: Dismantling/Decommissioning of some assets in this sale may require a satisfactory Safe Work Method Statement prior to any work taking place onsite.
Please see example Safe Work Method Statement below:
Safe Work Method Statement
Non-Prescribed Electrical Equipment
The DIY signage attached is in relation to non-prescribed electrical equipment purchased, of which electrical work is required under the WA Electrical (Licensing) Regulations 1991 to be performed by a licensed electrical contractor or licensed electrical worker.
Examples:
- Fixed-wired electrical equipment, such as air conditioners, stoves, ovens, electric hot water systems, ceiling fans, light fittings
- Electrical accessories, such as socket outlets, light switches, electrical cable, wall switches, plugs and cord extension sockets
- Electrical parts, such as electrical motors, switches, solenoids, elements
Electrical Power Tools and Equipment
If you have not purchased electrical tools and equipment in this auction disregard this notice.
Electrical Power Tools and Equipment (Inc. electrical leads)
The electrical articles in this auction have not been proved to be electrically safe. The electrical articles have not been tested by a qualified electrical worker and have not been proved to be electrically safe. General advice on how to use second-hand electrical power tools and equipment (including electrical leads) safely. General safe use advice for electrical power tools and equipment etc. intended for use with rated voltage of not more than 250V for single phase appliances and 480V for other appliances. This advice is not intended to replace specific manufacturer's information but can be used as a general guide. This advice does not cater for young children or people who are physically weak.
You are urged to::
- Use the power tool only for its intended purpose.
- If the power tool is for indoor use only, do not use outdoors.
- Do not immerse the power tool in water unless it is designed for this purpose.
- Keep hands, fingers, feet, toes and hair away from dangerous moving parts, cutting blades and the like.
- Do not use electrical power tools in the rain.
- Make sure you have dry hands when operating an electrical power tool.
- Do not use a damaged power tool.
- A power tool may not be intended for use by children or people with an illness or disability without supervision.
- Young children should not be allowed to play with the power tool.
- Some power tools require special precautions for installation or user maintenance or both.
- The plug must be removed from the socket-outlet before any cleaning or maintenance is done.
- Do not place cord extension sockets or portable power outlet boards where they may be splashed or where moisture may get in.
- Ensure ventilation holes or outlets are not blocked or partially obstructed.
- If a fixed power tool does not have a supply cord and plug or other means for disconnection from the supply, a means for disconnection must be incorporated into the fixed wiring according to the Wiring Rules.
- If the supply cord or plug is damaged:
- The manufacturer or its service agent or a similarly qualified person must replace the cord to prevent an accident.
- Power tools with specially prepared cords must be replaced by a special cord or assembly available from the manufacturer or its service agent.
- Other power tools that have a supply cord that cannot be replaced, should be scrapped.
- The power tool should be maintained in order to ensure a long, useful life and to protect the operator against electric shock or mechanical mishaps.
- A safety switch can enhance electrical safety when using electrical power tools.
FAQs
- What is Autobid?
- What is 'Going, Going, Gone'?
- What is Buyer's Premium?
- What if I change my mind?
- How do I cancel my bid?
- Can I inspect items before bidding on them?
For answers to these questions and more, please visit SHOPPING WITH GRAYS
Inspection & Collection
Location: Mt Gambier SA & Tumut NSW
Inspection: Inspection by appointment only please call Sangar on 0438 940 094
Collection:Pick up by appointment only please call Sangar on 0438 940 094
Grays is working with our customers whilst the COVID-19 situation is present regarding collection of assets, there will be no storage or additional fees charged due to interstate buyers not able to collect their purchases.
Collections Contact Person - including third party collections (see below):
- Pick up by appointment only please call Sangar on 0438 940 094
Collection Notes:
- Any items remaining uncollected after the specified timeframe will incur a storage fee or may be deemed abandoned and disposed of
- Goods will only be released with the correct buyer details being provided (full buyer name, sale number, Lot number and I.D.).
- Grays may take a copy (photocopy or electronic copy) of the document that proves the Registered Buyer’s identity, such as a driver licence or other photo ID. Taking such a copy is reasonably necessary for Grays business activities. The copy will be collected, held, used and disclosed by Grays in accordance with the
Grays Privacy Policy- Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale.
- Please be aware during busy periods an extensive wait time should be expected
- Note: It is the buyer’s responsibility to ensure their vehicle complies with all legal requirements for towing any towable asset, non-compliant vehicles will not be permitted to leave with an asset on tow.
COLLECTION CAN ONLY TAKE PLACE ONCE CLEARED FUNDS HAVE BEEN RECEIVED
Third Party Collection
If you wish to send a third party to collect your goods on your behalf, they will need:
- A copy of your Winner's Email
- A scanned copy of your photo ID
- A letter signed by you authorising them to collect the goods on your behalf (Please refer below Letter of Authorisation template)
- They will also be required to produce identification and sign for the goods on behalf of buyers acting as the authorised agent.
Grays do not carry manual consignment notes nor complete them for third party carriers. Grays staff will not release the goods to anyone other than you unless they carry the appropriate authority. By appointing third party pick up you have given them the authority to sign off on the condition of the goods being picked up.
Please note: Grays are not responsible for the goods once they have been signed for. Any problems relating to the transportation of the goods will need to be taken up with the third party acting on your behalf.
- Note: It is the third party's responsibility to ensure their vehicle complies with all legal requirements for towing any towable asset, non-compliant vehicles will not be permitted to leave with an asset on tow.
Third Party Collection Letter of Authorisation Template
General Site Information
Please Note: Enclosed footwear must be worn at all times when inspecting or collecting goods.
- Collection of the assets is the responsibility of the purchaser.
- Grays - WILL NOT package your item or organise a courier / transport for the purchaser.
- Note: It is the buyer’s responsibility to ensure their vehicle complies with all legal requirements for towing any towable asset, non-compliant vehicles will not be permitted to leave with an asset on tow.
Site Access:
- Persons under the age of 16 years will not be permitted on site unless accompanied and supervised on site.It is a condition of entry that all persons entering the site comply with any directions given by Grays staff, their representatives or the site controller.
- It is a condition of entry that all persons conduct themselves in a manner which does not endanger the health and safety of other persons on site, and which does not create a risk to health and safety.
Personal Protective Equipment (PPE):- Grays will specify, according to the hazards and risks assessed as present on the site, any mandatory PPE required to be worn prior gaining approval to entry to the site. This equipment may include Safety Footwear, Safety Eyewear, Hearing Protection, and Head Protection, or any other item of PPE deemed necessary.