Stay safe Australia! Most Grays locations remain open click here for more details.
Advertisement

1Kg Ferric chloride anhydrous FeCl3 96% Powder PCB Etching

$39
Warranty:

48 Hours from delivery date

Free Delivery on this purchase

Free delivery

1Kg Ferric chloride anhydrous FeCl3 96% Powder PCB Etching

Important Information

  • Add the dry powder little-by-little to a larger volume of water.
  • Ferric Chloride produces a great deal of heat when wet.
  • Never add water to the powder.
  • Ferric Chloride will also fume in moist air.
  • It is highly hygroscopic and can absorb enough moisture from the air to dissolve itself into a liquid.
  • Ferric Chloride Anhydrous (FeCl3) is commonly used as an etchant.
  • To make a powerful etching solution for Damascus knives, add 150-300grams of Ferric Chloride to 1 litre of distilled water.
  • Etching speed will depend on concentration, temperature, and agitation.
  • Classification: CHLORIDE
  • Type: FERRIC CHLORIDE
  • Molecular Formula: FeCl3
  • Standard: Industrial Grade
  • Purity:96%min
  • Application: Industrial
  • Colour: Black
  • Molecular weight: 162.204
  • Density:2.8 g/cm³

Hazard statements

  • H290 May be corrosive to metals
  • H302 Harmful if swallowed
  • H315 Causes skin irritation
  • H317 May cause an allergic skin reaction
  • H318 Causes serious eye damage
  • Precautionary statements
  • Precautionary statements - prevention
  • P280 Wear protective gloves/eye protection.

Exposure controls

Use safety goggle with side protection.

Skin protection

1- Hand protection:

  • Wear suitable gloves.
  • Chemical protection gloves are suitable, which are tested according to EN 374.
  • For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
  • The times are approximate values from measurements at 22 ° C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time.
  • If in doubt, contact manufacturer.
  • At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved.
  • The data apply only to the pure substance.
  • When transferred to substance mixtures, they may only be considered as a guide.

2- Type of material

  • NBR (Nitrile rubber)

3- Material thickness

  • =0,3 mm

4- Breakthrough times of the glove material

  • >480 minutes (permeation: level 6)

5- other protection measures

  • Take recovery periods for skin regeneration.
  • Preventive skin protection (barrier creams/ointments) is recommended.

6- Respiratory protection

  • Dust/Gas Respirators

GST Note: GST is included in the price of this item. GST is included in the freight.

Loading content...
Advertisement

Sign Up Now

Sign up to receive upcoming Sales & special offers!

Privacy Statement and Consent: By providing your email address, you consent to us sending you our newsletters as well as promotional material, updates and further information about our products and services. Our Privacy Policy contains information about how you can access and correct your personal information, how to make a complaint, and how we deal with complaints.

Subscribe

Follow Us

We Accept

Follow Us


NSW Liquor Act 2007 - It is against the law to sell or supply alcohol to or to obtain on behalf of a person under the age of 18 years.
NSW Liquor Licence LIQP770010049
Motor Dealer Licence: NSW MD13910, VIC LMCT11156, SA MVD277714, QLD 1700072, WA MD25136. NSW Motor Vehicle Recycler Licence: M057736
QLD Real Estate and Auctioneer Licence 4448746

Download Our App

New to Grays?
Get $10 off your next order* when you sign up!
Email*
* Min. spend $100. One use per customer.Privacy policy