Toshiba 215MW Steam Turbine Generator - Scrap Tender

Sale no: 3019311

Sale closed

Toshiba 215MW Steam Turbine Generator - Scrap Tender
Sale type
Sale date/time
Sale location
Bell Bay, Tasmania, Australia, TAS
Buyers premium
Under instructions from
Korda Mentha
In the matter of
Gunns Limited (Receivers and Managers Appointed)
Reason for sale

Matthew Fraser or (m) +61 (0)488 064 350

2009 Toshiba 215MW Steam Turbine Generator

Please submit the attached tender document by 17th June 2021 via email to Matthew Fraser by clicking this link

Tender Document

Storage of Equipment Post Sale

  • The current storage lease must be taken over by the purchaser as of the 1st July.
  • The storage lease cost is approx. $7,000 plus gst per month.
  • If extra space was required to process the equipment on site, the port will advise on a m2 per month price for the duration of the processing phase.
  • Once the equipment is paid and lease is taken over by the purchaser, the transaction from the receiver/ Grays is complete and the responsibly of the equipment will be with the buyer.

Port Acess Requirments

  • If the successful buyer would like to conduct works on site, they will be required to hold a current Maritime Security Identification Card (MSIC). Buyers contractors (such as crane companies or freight) can be escorted on to site by the card holders.
  • The card application can be made via who advise it would be approved in 2-3 weeks.
  • Bell Bay Port contacts will be passed over to te buyer to arrange access and the change over of the current stoage lease.

Packing List with Weights

Please find packing list attached or call Matthew Fraser for futher informtion on +61 (0)488 064 350

Packing List




  • Extraction & condensing
  • Inlet pressure: 104 bar
  • Output: 215MW
  • MP2: 22 bar
  • MP1: 10 bar
  • LP: 4.5 bar
  • Feed Water: 0.4 bar
Minimum load:
  • No extractions
  • Only bleeds
  • Steam flow: 45 kg/s
Maximum load:
  • Steam flow: 270 kg/s


  • 250 MVA
  • Air to Water Cooled
  • 18 kV
  • 8019 A
  • 50 Hz
  • 3000 rpm


  • Average: 17 ºC
  • Min: 15 ºC
  • Max: 25 ºC


  • Total weight:~1,075 Freight ton
  • Total items: 74
  • Condenser Top Cover: 2 x 15 ton
  • Condenser: 2 x 85 ton
  • Turbine: 268 ton
  • Generator: 277 ton

Storage Conditions

Storage Conditions

Delivered 2009, currently stored indoors and secured, Turbine & Generator completely sealed, silica gel is inserted in the Turbine & Generator and regularly replaced. Equipped with electronic monitoring sensors for humidity & temperature with criteria from Toshiba for storage, monitoring report generated monthly, inspection of unit every (2) weeks, thorough Inspections were done every (6) months until 2012, then yearly, inspection protocols available.

Conditions of Sale

Conditions of Sale

This sale is pick up only from Bell Bay Pulp Mill, Tasmania.

Inspection is highly recommended prior to bidding, description & photos should be used as a guide only.

Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchaser responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned.

Invoice totals exceeding $10,000 must be paid by direct deposit.

A Buyers Premium of 5% + 10% GST applies to all lots purchased in this auction.

By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale.

Please take care when placing a bid, as once your bid is placed it cannot be altered or withdrawn.

Graysonline will not be organising transport of goods. Please consider this prior to bidding.

Special Sale Terms

Occupational Health & Safety ASSET REMOVAL & REUSE

GraysOnline warn buyers that all plant offered for sale at Auction may not be fit for use in a workplace. It is the buyers/users responsibility to ensure that it is brought to a state necessary to comply with the Occupational Health & Safety Act and is fit for purpose. The cost and responsibility for all aspects of asset removal lies with the buyer. All work carried out by the buyer or his/her agent must be in accordance with relevant site and/or industry conditions as well as to the instructions of GraysOnline Auctions and our vendor.

A summary of these types of enforceable requirements is as follows.

  • Persons under the age of 15 years of age will not be permitted on site unless accompanied and supervised by an adult at all times
  • Tradespeople eg electricians, plumbers etc will be required to produce relevant licence before commencing work on site
  • Forklift, crane drivers, riggers etc will be required to produce licence before commencing work on site
  • It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or representatives
  • Work carried out on this site must be done in a manner compliant with all Occupational Health & Safety legislation
  • All power tools and equipment used on this site must be tested (tagged) safe for use in accordance with AS3760 service testing and inspection of electrical equipment
  • GraysOnline will specify, based on the hazards present on the site, the mandatory personal protective equipment required to be worn prior to approval being given for entry to the site, eg safety footwear, safety eyewear, hard hats etc
  • The use of certified equipment, harnesses, work platforms etc will be required for any work carried out above 1.8 metres



Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.

Inspection of the assets can be made at the following times:

  • Monday 7th June
  • Tueday 8th June
  • Tueday 15th June

By appointment with Matthew Fraser on +61 (0)488 064 350 or email:

Location ~ Bell Bay Pulp Mill, Tasmania



Delivery is not an option for this sale. The removal of the goods is the buyer's responsiblity **

The pickup address is Bell Bay Pulp Mill, Tasmania. Pick ups are not allowed outside of the dates/times listed below.

  • The area is defined as a work site and in accordance with the requirements of the VIC OH&S Act 2004, site removal activities must be conducted on a safe manner. In order to manage and minimise site risks. The assets have been categorized into type A or B Assets

Site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment with a qualified contractor. JSAs and contractor requirements forms are to be submitted before work is started on site.

Pick up can only be made once cleared funds are received. Purchasers cannot pick up until full invoice is paid.

Please advise Graysonline of your removal/collection arrangements, the following contractor package must be faxed or emailed to Matthew or +61 (03) 9427 4200.

An invoice will be available for collection when you pick up your goods.

Once assets are removed or lease if taken over the transaction between GraysOnline and the bidder is deemed complete. There will be no recourse beyond this time, even in the event of third party collections. If you are unsure please refrain from bidding.

Important Information: Please note it is the purchaser’s responsibility to ensure the safe removal of their lots and provide suitably qualified personnel to remove their lots. All lots have been electrically disconnected. Occupational Health and Safety regulations apply to this site. Any questions regarding the removal of any lots should be directed to the enquiries name or phone number indicated on sale web page.

Third Party Pick Up

If you intend to send a Third Party to collect your goods on your behalf, you need to send them with a copy of your Winner’s E-mail and Signed Note of Authority permitting GraysOnline staff to release your purchases to the third party. Alternatively, Email - matthew.fraser or fax all relevant documents to +61 (03) 8552 4400 with the required information to ensure a speedy and efficient collection.

The information needed is:

  • Sale and Lot Numbers e.g. 002-60325
  • Buyer’s Registered Name and/or Email
  • Transport details: Company Name, Contact Person and Job Number provided by the transport company.

Surplus Equipment to Sell

For an obligation free appraisal and quote please contact Matthew Fraser today on 0418 665 722 or email


Sign Up Now

Sign up to receive upcoming Sales & special offers!

Privacy Statement and Consent: By providing your email address, you consent to us sending you our newsletters as well as promotional material, updates and further information about our products and services. Our Privacy Policy contains information about how you can access and correct your personal information, how to make a complaint, and how we deal with complaints.


Follow Us

We Accept

Follow Us


NSW Liquor Act 2007 - It is against the law to sell or supply alcohol to or to obtain on behalf of a person under the age of 18 years.
NSW Liquor Licence LIQP770010049
Motor Dealer Licence: NSW MD13910, VIC LMCT11156, SA MVD277714, QLD 1700072, WA MD25136. NSW Motor Vehicle Recycler Licence: M057736
QLD Real Estate and Auctioneer Licence 4448746

Download Our App