3014 views
0 watching

Important information about the sale of this item/s. Sale of this item/s in an auction context is on an “as is, where is” basis. Where available, a full inspection of the item/s prior to bidding is highly recommended.

The description is a guide only. Grays does not test the item/s or test their inclusion/s. As a result, there may be other damage or issues which have not been identified in the description or photographs. Grays does not make any warranties as to the operation of any feature or inclusion referred to in this description.

Overview

Condition Used
GST: Exclusive (see below note)
Buyers premium
Buyers premium
Variable
Final Bid Price Buyers Premium
$0 - $5,000 25%
$5,001 - $25,000 16.5%
$25,001 - $40,000 11.5%
$40,001+ 9%

Learn more

Location Lonsdale SA 5160
Category Manufacturing
Sales Support Ted Byrne or (m) 0457 855 436
Lot ID 0001-8020883
Part of Sale Sage Automation Custom Made Powder Coating Line - EOI
Warranty

Description

Sage Automation Custom Made Powder Coating Line

  • Sage Custom Made Powder Coating Line, consists of a, Conveyor chain system which runs throughout the whole line, 3 stage pre treatment system, 1- chemical clean, 2- demineralise rinse, 3- chemical etch and prime, gas fired dry oven / cure oven, powder application booth, powder supply booth, air dryer, 2 x cyclone hoppers, interlock power key control pad, , waste buffer tank, effluent waste water system, Shelving unit with spare parts,
  • PROCESS : material is placed on a hook styled metal pole and put onto chain conveyor line, material then goes through a 3 stage pre treatment system, material then goes through one side of oven to dry material, material then goes through powder supply booth, powder supply booth has 2 sprayers that are on pneumatic rams with a powder recyling system, Material then goes through oven again to cure, material then comes out of oven on conveyor line as is taken off,
  • Effluent system is located outside main building and consists of 1 x Hydrochloric acid tank, 1 x Sodium hydroxide tank, 1 x holding tank approximately 4000mm in diameter 2 x mixing tanks approximately 1500mm in diameter, various water pumps, eye wash station, sewer discharge flow meter, SHEDDING, STEPS AND BUNDING NOT INCLUDED,
  • PROCESS : effluent water from waste water tank comes from there to holding tank then placed into mixing tanks and processed to have the adequate PH levels to then discharge to sewer, Vendor has said that the individual units when installed came in in one piece each,
  • VENDOR WILL DECOMMISSION WATER, GAS AND ELECTRICITY SUPPLY,
  • BUYER TO SUPPLY QUALIFIED TRADESMAN TO DECOMMISSION ENTIRETY OF POWDER COATING LINE, BUYER TO SUPPLY CRANES, FORKLIFTS, TRANSPORTATION ETC
  • Dimensions: Powder coating line Overall length 31 mtrs approximately,
  • Cyclone hoppers Lx 2200mm Wx 2400mm Hx 3600mm approximately,
  • Air Dryer stand Lx 3100mm Wx 1600mm Hx 3400mm,
  • Cure/Dry Oven Lx 8700mm Wx 3900mm Hx 3700mm approximately,
  • 3 Treatment system Lx 6000mm Wx 3300mm Hx 4000mm approximately,
  • 3 tier racking, Lx 2950mm Wx 850mm Hx 2250mm approximately,
  • waste buffer tank 2000mm Diamater approximately,
  • Effluent Plant dimensions, acid tanks Lx 4000mm Wx 2000mm Hx 3000mm approximately,
  • 2 tanks 1500mm Diamater approximately,
  • holding tank 4000mm approximately
  • Damage Notes: General wear and tear

Item condition is `Used`, please refer to Sale Terms tab for definition. This item is sold on an `As Is` and `Where Is Basis`

Location: Lonsdale SA 5160

(882843-1)

GST Note: GST will be added to the final bid price of this item. GST will be added to the buyers premium.

Debit Card / Credit Card / PayPal surcharge fee may apply. See User Agreement

Plant_Hazard_Report

FAQs

  • What is Autobid?
  • What is 'Going, Going, Gone'?
  • What is Buyer's Premium?
  • What if I change my mind?
  • How do I cancel my bid?
  • Can I inspect items before bidding on them?

For answers to these questions and more, please visit Grays Support.

Yellowgate - Rent Now, Buy Later

Yellowgate - Rent Now, Buy Later

Grays has partnered with Yellowgate to help you gear up with any machinery valued above $50,000 through their Rent Now, Buy Later solution.

  • 12 month rental term
  • Buy Anytime
  • Return after 12 months
  • 100% tax deductible
  • Off balance sheet
  • Low upfront costs

4 easy steps to get started:

  1. Verified ID
  2. Verified Business
  3. Verified Work Source
  4. Verified Equipment

Click here for more information

*Important information: Business customers only. Finance provider is Yellowgate Group Pty Ltd ACN 647 366 854 ("Yellowgate"). All applications for credit are subject to credit approval criteria. Terms and conditions, fees and charges apply. Grays eCommerce Group Limited ACN 125 736 914 ("Grays") does not provide or arrange finance. By clicking this link you will be redirected to Yellowgate’s website where you may complete an application for finance.

This information (a) is current as at 21/04/2021, (b) is subject to change, (c) is provided for general information only, (d) does not take into account your personal situation, and (e) does not constitute financial and/or tax advice. You should consider whether the information is appropriate to your needs, and where appropriate, seek professional advice from financial, legal and taxation advisers. The information has been prepared by Yellowgate and Grays does not warrant its accuracy. Although every effort has been made to verify the accuracy of the information, Yellowgate and Grays, and each of their officers, employees and agents disclaim all liability (except for any liability which by law cannot be excluded), for any error, inaccuracy, or omission from the information or any loss or damage suffered by any person directly or indirectly through relying on this information.

As a referrer, Grays eCommerce Group Limited ACN 125 736 914 will receive a financial benefit (referral fee) from Yellogate for each customer that completes a purchase of equipment using Yellowgate’s Rent Now, Buy Later funding solution.

© 2021 Grays eCommerce Group Limited ACN 125 736 914 is a wholly owned subsidiary of Grays.com Pty Ltd ACN 634 636 310.

Expressions of Interest

Expressions of Interest close Friday 29th August 2025 at 4:00pm (AEST) (noting equipment may be sold prior to this date). For enquiries and/or to obtain a copy of an Offer Document please contact Ted Byrne on 0457 855 436.

Conditions of Sale

This sale is pick up only from Lonsdale, South Australia.

The asset is used therefore inspection is highly recommended prior to making an offer. Description & photos should be used as a guide only.

A Buyer’s Premium will be added to your final offer price.

For Example:

Successful Offer Price is $25000 + 9% Buyers Premium = $27250.00 +10% GST= invoice total of $29975.00By registering and making an offer, you have agreed to our terms and conditions of sale.

If necessary, please familiarise yourself with them prior to making an offer on the asset in this sale.

Grays will not be organising transport of goods. Please consider this prior to making an offer.

Payment - Invoice totals must be paid by direct deposit.

For payment enquiries, please email: accountsreceivable@grays.com.au

GST Refund for Exports

To claim a GST refund for an asset that has been exported, you must:

  • Notify us of your intent to export within five (5) days of the Sale closing date
  • Pay your invoice in full (including any GST)
  • Supply proof of export of the asset within 60 days of the invoice payment date. Acceptable documents are a Bill of Lading, Sea Waybill or Air Waybill
  • Please note that refund of GST on Buyers Premium (a service) is only available to overseas buyers

Auction Fees

For information regarding the Administration Fees, please see below:

What is Product Condition?

The Condition of each product is stated on its Lot Page, and we strongly urge you to familiarise yourself with the Condition before bidding. This is because Grays sells a wide range of products in a variety of Conditions on behalf of our Vendors.

It's important that you read the Lot Description for possible additional information on the Condition of the product including any applicable warranty details. You should take the Condition and the Lot Description into account when you place your bid as we do not offer refunds if you change your mind about your purchase.

Information regarding Product Conditions can be found by clicking below:

Terms & Conditions of Sale

PLEASE NOTE: THIS IS AN AUCTION SALE. ALL ASSETS IN THIS SALE ARE SOLD "AS IS" WITHOUT WARRANTY AND COOLING OFF PERIOD

By registering and bidding you have agreed to our terms and conditions of sale. All bidding is subject to the online "Users Agreement".

The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the users agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.

Terms & Conditions can be found by clicking here: Terms & Conditions

Buyers Please Note:

  • By registering and bidding, you have agreed to Grays terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on any items in this auction.
  • The terms and conditions of the online auctions may change from time to time. Please ensure you clearly read the special terms and conditions contained in this page and also in the bidders agreement. Continuing to use the online auction service following amendments to these terms & conditions will constitute your acceptance of the new terms & conditions applying to this service.
  • Grays staff are onsite for security purpose only, please make sure you have people to help you load your purchases and provide suitable transport.
  • Collection can only take place once cleared funds have been received.

Grays guarantees that all vehicles/boats/motorbikes (Vehicle(s)) in this sale are sold with clear title, however in this respect note that:

  • Bidders may find when they do perform a PPSR check (highly recommended) in many cases the vehicles do have a security interest registered against them, which will be lifted as soon as the relevant vehicle is sold and monies are cleared in the secured party’s/security holder’s account; and
  • Please allow up to 10 business days for the security interest to be removed.

Inspection & Collection

Location: Lonsdale, South Australia

Inspection: Inspection can be made by appointment only with Ted Byrne on 0457 855 436.

Collection: Collection can be made by appointment only with Ted Byrne on 0457 855 436.

Collection Notes:

  • Collections can only take place once cleared funds have been received.
  • Items remaining uncollected after the specified timeframe may be deemed abandoned and disposed of unless prior arrangements have been made with the respective contact listed on the sale.
  • Goods will only be released with the correct buyer details being provided (full buyer name, sale number, Lot number and photo ID).
  • Asset packaging and removal are the purchaser’s responsibility in the time frame specified for the sale.
  • Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

Third Party Collection

If you wish to send a third party to collect your goods on your behalf, they will need:

  • A copy of your Winner's Email.
  • A scanned copy of your photo ID.
  • A letter signed by you authorising them to collect the goods on your behalf (Please refer to the Third-Party Collection Authorisation template below).
  • They will also be required to produce identification and sign for the goods on behalf of buyers acting as the authorised agent.
  • Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

Grays do not carry manual consignment notes nor complete them for third party carriers. Grays staff will not release the goods unless they carry the appropriate authority.

Please note: Grays are not responsible for the goods once they have been signed for. Problems relating to transportation are the responsibility of the third party acting on your behalf.

Third_Party_Collection_Authorisation_Form

Site Access

  • High Vis Vests are a mandatory requirement for all Grays sites.
  • Enclosed footwear is a mandatory requirement for all Grays sites.
  • Enclosed footwear is a mandatory requirement for all Grays vendor sites.
  • Grays may specify mandatory PPE required to be worn before entry is permitted. This equipment may include safety boots, safety glasses, hearing protection, hard hats, or any other item of PPE deemed necessary.
  • All persons entering the site must comply with any directions given by Grays staff, their representatives or the site controller.
  • Persons under the age of 16 years are not permitted on sites unless accompanied and supervised by a responsible adult.

NOTE:

  • Persons under 16 years are not permitted on Vendor sites Grays have assessed as high risk.
  • Please ensure you review the WHS tab to ensure you have a clear understanding of all safety requirements regarding the collection process.

Safety

Safety

Please refer to the WHS tab for more information regarding safety requirements at Grays sites.

For Delivery

For Delivery, Please refer to our delivery homepage for collection and delivery options.

Site Access

  • High Vis Vests are a mandatory requirement for all Grays sites.
  • Enclosed footwear is a mandatory requirement for all Grays sites.
  • Enclosed footwear is a mandatory requirement for all Grays vendor sites.
  • Grays may specify mandatory PPE required to be worn before entry is permitted. This equipment may include safety boots, safety glasses, hearing protection, hard hats, or any other item of PPE deemed necessary.
  • All persons entering the site must comply with any directions given by Grays staff, their representatives or the site controller.
  • Persons under the age of 16 years are not permitted on sites unless accompanied and supervised by a responsible adult. NOTE: Persons under 16 years are not permitted on Vendor sites which Grays have assessed as high risk.
  • No smoking or Vaping.
  • No pets and animals.
  • Follow traffic management plan and obey the speed limit of 10km/h.
  • Follow instructions of Grays staff and comply with the conditions of entry.
  • Grays reserves the right to refuse entry.

Collection Compliance

  • Grays staff will not load a truck, trailer or vehicle that is assessed by them as inappropriate, this includes, but is not limited to:
    • Oversize
    • Overweight
    • Over height
  • Items that are fixed to a pallet, must remain this way when loading.
  • Items with manufactured lifting points, will only be lifted using these features.
  • Drivers MUST wait in the designated exclusion zone when loading procedures take place.
  • It is the responsibility of the buyer or third party to ensure they bring adequate manpower to manually load items into their vehicles, Grays staff are not permitted to assist with manual handling loading tasks.
  • It is the responsibility of the buyer, or third party to adequately tie down their load. Once loaded, Grays staff are not permitted to participate in the tie down procedure.

Lifting, Loading & Unloading Contractor Requirements

Crane Operations Require:

  • Licence verification.
  • SWMS for the operation to be conducted.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Truck Crane / Hiab Operations Require:

  • Licence verification.
  • SWMS for the operation to be conducted on request.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Forklift Operations Require:

  • Licence verification.
  • Exclusion zone plan verification.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Operators of Plant:

  • Contractors engaged to move plant and equipment by a buyer or vendor must:
    • Follow exclusion zone requirements.
    • Be competent to operate the equipment being loaded.
    • Ensure all CHAIN OF RESPONSIBILITY (COR) requirements are understood and adhered to.

Grays Site Trade Requirements

Disconnection of Electrical Equipment

All work carried out must be completed by a licenced electrician and is required to provide on request:

  • High Risk License
  • SWMS for the operations assessed to be high risk.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Disconnection of Mains Gas & Equipment

All work carried out must be completed by a licenced Gas fitter / Plumber and is required to provide on request:

  • High Risk License.
  • SWMS for the operations assessed to be high risk.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Disconnection of Mains Water & Equipment

All work carried out must be completed by a licenced Plumber and is required to provide on request:

  • High Risk License.
  • SWMS for the operations assessed to be high risk.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Disconnection of Refrigeration and Air Conditioning Equipment

All work carried out must be completed by a licenced Refrigeration Mechanic and is required to provide on request:

  • High Risk License.
  • SWMS for the operations assessed to be high risk.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.
  • Proof any released gasses are captured, stored, transported and disposed of as per legislative requirements.

Disconnection of Electrical Equipment

All work carried out must be completed by a licenced electrician and is required to provide on request:

  • High Risk License.
  • SWMS for the operations assessed to be high risk.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Dismantling and Decommissioning of Equipment

All work carried out must be completed by Competent Trades and are required to provide on request:

  • High Risk License.
  • SWMS for the operations assessed to be high risk.
  • Confirmation of Workers Compensation Certificate of Currency.
  • Confirmation of Public Liability Certificate of Currency.

Working at Heights

Working at Heights is when there is a danger a person could fall from one level to another at a height of 1.8 metres or greater. This includes the risk of a fall from:

  • in or on an elevated workplace from which a person could fall, or
  • in the vicinity of an opening through which a person could fall, or
  • in the vicinity of an edge over which a person could fall, or
  • on a surface through which a person could fall, or
  • in any other place from which a person could fall.

Workers who have been identified using the description above as to be Working at Heights must:

  • Provide SWMS.
  • Demonstrate harnesses etc are compliant.
  • Use purpose-built equipment.

General Site Requirements

General Site Requirements

All persons attending a Grays site, or a Grays vendor site must:

  • Ensure all work be completed in a manner compliant with all Work Health & Safety legislation.
  • Obey all instructions given by Grays staff or Grays representatives, including any direction to stop work for safety reasons.
  • Remove all waste generated in the activity they have taken part in.

Surplus Equipment to Sell?

Surplus Equipment to Sell?

For an obligation free appraisal and quote or to learn more about selling at Grays, please visit SELL AT GRAYS.

Why Grays?

Why Grays?
  • 2M+ Registered Users
  • 1M+ Unique Visitors Per Month
  • National Marketplace
  • 24 Hour Bidding
(none)

Sage Automation Custom Made Powder Coating Line

Expressions of Interest

Expressions of Interest close Friday 29th August 2025 at 4:00pm (AEST) (Noting equipment may be sold prior to this date)

Ted Byrne Enquires about the item